Soliphant M FTM50, FTM51, FTM52

Soliphant M FTM50, FTM51, FTM52
Level limit switch
Universal vibration limit switch for fine-grained bulk solids,

also for explosion-hazardous areas

Application
Soliphant M is a robust level limit switch for use in silos
containing fine-grained or powdery solids even with a
low bulk density.
The various designs mean the device has a wide range of
applications. Many certificates are available for use in
dust or gas incendive hazard areas.
FTM50 compact design for installation in any direction.
A wide range of applications thanks to various variations;
e.g.
polished short fork with stainless steel housing (F15) and
Tri-Clamp;
coated standard fork with aluminium housing (F17) and
flange;
standard fork with 280 °C (540 °F) rating and
aluminium housing (F13)
FTM51 with extension pipe up to 4 m (13.1 ft) for
installation in any direction; e.g. aluminium housing
(T13) with separate connection compartment Ex de
FTM52 with rope up to 20 m (65.6 ft) for installation
from above; e.g. with aluminium housing (F17)
Typical applications: cereals, flour, cocoa, sugar, animal
feed, detergents, dye powder, chalk, gypsum, cement,
sand, plastic granules, fly ash

Your benefits
• Market leader in the area of level detection of bulk
solids with practical experience since 1967
• SIL2 in accordance with IEC 61508
• No mechanically moving parts: no wear,
long operating life
• Insensitive to external vibrations and build-up:
maintenance-free operation, independent of bulk
solids
• Various electronic inserts: e.g. NAMUR, relay,
thyristor and PFM-signal outputs for optimum
alignment with the plant control system
• Build-up and abrasion display selectable
• Density setting and switching delay selectable
• New: Process temperature up to 280 °C (540 °F)
• New: Choice of coated or polished sensor